Full Product Catalogue

A two pack, tar free, modified epoxy tie coat.

A high performance anti-corrosive zinc rich primer for heavy industry.

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection.

A two component product giving excellent durability and long term recoatability.

A one pack alkyd primer containing zinc phosphate anti-corrosive pigment.

A functional coating for identification of hot spots and internal insulation failures.

A user friendly, low VOC hot spread epoxy repair compound for application onto hand prepared hot steel.

Provides up to two hours cellulosic fire protection on various steel sections exposed in interior environments.

Formulated specifically to provide corrosion protection for the subsea market.

A high build, ‘cold spray’ applied coating, capable of providing corrosion protection.

Provides up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.

A solvent free, water based primer for correctly prepared steel.

Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two pack, silicone elastomer tie coat for new building or maintenance and repair.

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.

A three pack tie coat for use with International Intersleek systems.

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

Biocide-free and designed for application onto the underwater hull.

A water-based rust remover which is 100% biological degradable and free from toxins.

A single component, water-based rust remover / cleaner gel for a range of substrates.

A new solvent-free epoxy phenolic lining that provides outstanding protection and maximum value.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

A two component primer which is ideal for speeding up production and throughput.

An epoxy primer which provides optimised control where thin film application is required.

A fast curing epoxy primer for use with International 3200 product series.

An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.

A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.