Full Product Catalogue

A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.

A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.

Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.

A single component, biodegradable, solvent based cleaner / degreaser.

A single component, water based paint disbonder designed to remove coating residues from metallic substrates.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

Designed for use within certain International Paints to provide a safe anti slip finish to walkways.

A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.

A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.

A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A light coloured, solvent free, pure epoxy coating for potable water tanks.

A one pack, alkyd based, high visibility coating for marking on ships. Available in fluorescent orange.

A two pack epoxy primer / undercoat / tie coat for internal ship spaces.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.

A highly cross-linked, two component, high build epoxy phenolic coating.

A single component, finish suitable for areas subject to intermediate service temperature that require a coloured finish.

A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.

A two component, low VOC, high solids, fast drying polyaspartic high gloss primer / finish coating.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

A quick drying single pack primer for maintenance above water areas that is compatible with most substrates.

A versatile, high performance maintenance coating.

A one pack, high build bituminous coating for use behind linings and in cofferdams for the protection of enclosed steel. Highways Approved Item No.141...

A phosphoric acid based mordant solution for treating galvanised steel. Highways Approved No. 155.