Full Product Catalogue

A two component epoxy sealer coat pigmented with aluminium flake.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A phosphoric acid based mordant solution for treating galvanised steel. Highways Approved No. 155.

A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.

A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A two component epoxy sealer coat, pigmented with micaceous iron oxide.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, high solids, high build, two component epoxy coating.

A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C), surface tolerant epoxy primer.

A two component, metallic zinc primer for steel in aggressive environments.

A two component epoxy holding primer.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.