£9.95 delivery on orders excluding certain products & postcodes *
A solvent free coating designed for installation onto steel or concrete surfaces.
For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.
A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.
A VOC compliant, single component, water based anti-corrosive primer/finish.
Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.
Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.
A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.
A water-based rust remover which is 100% biological degradable and free from toxins.
Intumescent coating for 60 minutes fire resistance to structural steelwork.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.