Full Product Catalogue

A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A 2 pack semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A solvent based intumescent coating for structural steel exposed to corrosivity category C4 (ISO 12944-2).

A 1 part, solvent borne, intumescent coating, for 60 minutes for protection of structural steel against cellulosic fires.

2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.

A very low VOC, 1 pack, waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires.

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.

A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.

A tough, hard wearing finish coat for application over properly primed surfaces.

A one component waterborne acrylic thin film 90 minute intumescent coating.

A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

For use on a wide variety of substrates including hand prepared rusty steel.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

A single component, water based acrylic finish for use in industrial environments.