£9.95 delivery on orders excluding certain products & postcodes *
A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.
A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A 2 pack semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.
A solvent based intumescent coating for structural steel exposed to corrosivity category C4 (ISO 12944-2).
A 1 part, solvent borne, intumescent coating, for 60 minutes for protection of structural steel against cellulosic fires.
2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.
A very low VOC, 1 pack, waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires.
A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.
A high build, fast drying corrosion inhibiting primer for structural steel in grey, red and other colours.
A tough, hard wearing finish coat for application over properly primed surfaces.
A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
For use on a wide variety of substrates including hand prepared rusty steel.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
A single component, water based acrylic finish for use in industrial environments.