International Paints

Home
Manufacturers
International Paints

International Paints are part of the huge AkzoNobel group and are one of the world’s biggest coatings manufacturers. The product range has coatings available for the industrial protective markets. Take the time to browse our product range and if you have any questions, please contact our technical support team for advice and guidance.

International Interlac 789
A single component, anti corrosive, one coat, rapid drying modified alkyd primer / finish.

From £75.78 £63.15
International Interlac 668
A one pack, alkyd based, high visibility coating for marking on ships. Available in fluorescent orange.

£224.83 £187.36
International Intergard 821
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

£182.24 £151.87
International Interprime 306
A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.

From £218.95 £182.46
International Interzone 101
A two component, solvent free epoxy which can be applied underwater and will cure underwater.

From £415.72 £346.43
International Intergard 5000
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.

From £442.97 £369.14
International Intercure 200HS
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

From £377.92 £314.93
International Interplate 937
A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

From £322.64 £268.87
International Intertherm 875
A single component, finish suitable for areas subject to intermediate service temperature that require a coloured finish.

From £717.28 £597.73
International Intercure 324
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

From £97.34 £81.12
International Interfine 629HS
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

From £143.77 £119.81
International Thinner GTA822
Suitable for thinning paints and equipment cleaning from International Paints.

From £58.87 £49.06
International Intercure 420
A two component, high solids low VOC epoxy micaceous iron oxide.

From £337.43 £281.19
International Interline 984
A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.

From £575.66 £479.72
International Intertherm 228HS
A highly cross-linked, two component, high build epoxy phenolic coating.

From £627.30 £522.75
International Intercure 99
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.

From £564.18 £470.15
International Intergard 475HS
A low VOC, high solids, high build, two component epoxy coating.

From £318.67 £265.56
International Intertherm 891
A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.

From £94.25 £78.54
International Interline 955
A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.

From £900.67 £750.56
International Thinner GTA853
Suitable for thinning paints and equipment cleaning from International Paints.

From £58.87 £49.06
International Intergard 251
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

From £264.76 £220.63
International Interline 925
For application to steel tank internals.

From £751.30 £626.08
International Thinner GTA803
Suitable for thinning paints and equipment cleaning from International Paints.

From £58.87 £49.06
International Intergard 269
A quick drying two component epoxy primer for immersed or exposed conditions within a system.

From £79.68 £66.40
International Thinner GTA713
Suitable for thinning paints and equipment cleaning from International Paints.

From £58.87 £49.06
International Interline 399
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.

From £643.78 £536.48
International Intergard 1735
A high performance, low VOC, water borne two component epoxy with a high gloss finish for use on structural steel and concrete floors.

From £179.50 £149.58
International Interline 850
A two component, chemically resistant, high solids, high build epoxy phenolic tank and pipe lining.

From £625.42 £521.18

About International Paints

International Paints is now the leading brand of AkzoNobel's Marine & Protective Coatings business unit, which has over 5000 employees in more than 60 countries. Factories supplying International Paint are located in approximately 30 countries, producing up to 1 million tons of coating annually.

The product range has coatings available for:

Concrete Repair & Protection
Intumescent Fire Protection
Linings
Temperature Resistant Coatings
Products for approved NORSOK specifications

If you are involved in one of these key markets then International Paints will have a product for you.

Infrastructure
Mining & Mineral
Oil, gas & chemicals
OEM
Power Generation
Water & Wastewater
Yacht
Architecture & Construction

Product ranges include:

Interchar - A range of solvent and water based intumescent coatings
Intercure - A range of 2 pack low temperature fast curing epoxy primers / finishes. Usually applied in paint shops to steelwork gritblasted to Sa2.5. Many of these products are approved as primers for Network Rail New systems and Highway Department items 111 and 112
Intercryl - Water based acrylic primer / finishes. Suitable for steelwork and masonry
Interfine - A range of 2 pack finishes including 2 pack acrylic polysiloxane and 2 pack epoxy acrylics. Available in a full colour range
Intergard - 2 pack epoxies including primers, high builds and finishes. Includes a water based epoxy available in a full colour range
Interline – A tank lining range including solvent free epoxies, vinyl esters and epoxy phenolics. Some of these products may require specialist applicators and / or equipment
Interplus – A surface tolerant range of coatings. Many comply to Highways Items 115/116 and to Network Rail Maintenance M20 and M24 systems. These are premier maintenance coating systems where a range of topcoats such as Interfines or Interthanes can be applied. This range includes a surface tolerant polyurethane Interplus 880 which is excellent on cladding, old powder coated substrates and existing old coatings even chlorinated rubbers
Interseal - Includes a surface tolerant epoxy with a full colour range available. Excellent primers / undercoats over surfaces prepared to St2 and St3
Interthane - 2 pack urethane finishes full colour range in gloss and semi gloss in full colour range Highways Item 168.
Intertherm - A range of high temperature range of coatings
Interzinc - Zinc rich and zinc epoxy primers for steel gritblasted to Sa2.5
Interzone - Coatings for immersed steelwork including Interzone 954 - an excellent product on Highways and Network Rail specs

Buy International Paints Online

As one of the market leaders in anti-corrosive coatings and fire protection, International Paints offers products and services to meet the highest international standards.

Promain offers high quality customer service with the aim of satisfying our customers needs. For read our full International Paints paint review listings, view each individual product above.. If you require a product specification or you have any questions regarding the products within this range, please take the time to contact us for technical coatings support.