Please note, this product is now unavailable via Promain.co.uk. This product is only available to approved and certified contractors.
Nullifire SC902 Intumescent Steel Coating is a low VOC, one coat, 2 pack high build system for fast cure effective fire performance up to a 120 minute fire rating.
Nullifire SC902 Intumescent Steel Coating provides a fast cure, off white, matt finish for intumescent fire protection on internal structural steel. This product is for professional use only by approved contractors. If you would like training or further information, contact our technical team on 01462 421333.
- High build potential with all fire
- Self priming system
- Tolerant of light rusting to steel up to 2 weeks post blasting
- Eartly weather resistance - shower proof within 1 hour
- Fast cure, even below 0°C - Touch dry in 1 hour
Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the datasheets found on the technical tab.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Please contact our technical team prior to discuss your requirements in regards fire protection internally.
Suitable Top Sealers
|Stock Colours:||Off White|
|VOC Content:||137.0g per Litre|
|Suitable Substrates:||For structural steel|
|Application Method:||Graco Mark V or equivilient|
|Theoretical Coverage:||1.75 Kg per m2 based on 1.0mm DFT|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Pot Life:||60 minutes at 20°C|
|Cleaner / Thinner:||Clean with Nullifire FC150. Do not thin.|
|Shelf Life:||9 months in original unopened packaging|
|Packaging:||Available in 25 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.