NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Jotun Penguard Primer
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

From £60.65 £50.54
Jotun Penguard Tie Coat 100
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

From £263.36 £219.47
Jotun Jotamastic 87 Aluminium
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

From £83.80 £69.83
Jotun Hardtop Optima
A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.

From £219.11 £182.59
Jotun Jotamastic 87 GF
A two component protective coating for use in high traffic, atmospheric and immersed environments.

From £314.28 £261.90
Jotun Jotamastic 87 Aluminium WG
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

From £83.80 £69.83
Jotun Jotamastic 87 GF Wintergrade
A two component protective coating for use in high traffic, atmospheric and immersed environments.

From £356.18 £296.82
Jotun Hardtop XP
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

From £87.22 £72.68
Jotun Marathon 550
A 2 pack structural steel and piping coating that will continue to cure while immersed.

From £351.36 £292.80
Jotun Hardtop Pro
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

From £169.39 £141.16
Jotun Jotamastic 90 WG Wintergrade
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

From £73.73 £61.44

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)