NORSOK Approved Paints

A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.

A two component surface tolerant, high solids, high build coating. NORSOK approved.

A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

A 2 pack structural steel and piping coating that will continue to cure while immersed.

A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.

A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.

A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.

A two-pack polysiloxane topcoat with excellent gloss and colour retention. Network Rail/Railtrack approved. Highways Approved Item No. 185.

A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

This product is now discontinued. See Jotun Marathon 550 as a potential alternative.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

A two component chemically curing epoxy coating that is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and ba...

Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.

A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.

A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.