NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Jotun Hardtop Pro
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

From £169.39 £141.16
Hempel Hempathane HS 55610
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

From £76.32 £63.60
Jotun Hardtop CA
A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.

From £136.88 £114.07
Jotun Hardtop AX
A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

From £134.34 £111.95
Jotun Solvalitt
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

From £130.14 £108.45
International Interthane 990
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

From £116.82 £97.35
International Interfine 691
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

From £96.59 £80.49
Hempel Pro Acrylic 55883 QD
Suitable for use as a finishing coat for protection of structural steel.

From £105.22 £87.68
Hempel Hempathane Topcoat 55210
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

From £73.66 £61.38
Sherwin Williams Acrolon 1850 Acrylic Epoxy Finish
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

From £173.16 £144.30
Sherwin Williams Acrolon 7300 Acrylic Finish
A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.

From £115.68 £96.40

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)