NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Carboline Thermaline 4700 Aluminium
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

£89.40 £74.50
Jotun Marathon 550
A 2 pack structural steel and piping coating that will continue to cure while immersed.

From £351.36 £292.80
Jotun Solvalitt
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.

From £130.14 £108.45
Jotun Penguard Primer
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

From £60.65 £50.54
Jotun Penguard Pro
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

From £363.65 £303.04
Jotun Penguard Express
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

From £55.56 £46.30
Jotun Jotamastic Smart Pack
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

From £126.36 £105.30
Jotun Jotamastic 90 WG Wintergrade
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

From £73.73 £61.44
Sherwin Williams Epidek M339 - Formerly Leighs
A 3 pack epoxy high build anti slip deck coating, approved for MoD. UK MoD/DRA (Ministry of Defence) to DEF STAN 80 -134.

From £283.94 £236.62

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)