NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Carboline Carbomastic 18 FC
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.

From £106.20 £88.50
Carboline Carboguard 890 GF
A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets.

From £132.30 £110.25
Jotun Tankguard SF
A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.

From £521.92 £434.93
Jotun Marathon 550
A 2 pack structural steel and piping coating that will continue to cure while immersed.

From £351.36 £292.80
PPG SigmaCover 410 MIO
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.

From £324.00 £270.00
*Jotun Marathon
This product is now discontinued. See Jotun Marathon 550 as a potential alternative.

In stock
Jotun Jotamastic 90
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

From £80.28 £66.90
Jotun Penguard Primer
A two component, polyamide cured, high molecular weight epoxy coating designed as a primer for new construction.

From £60.65 £50.54
International Intergard 740
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

From £443.78 £369.82
International Interline 925
For application to steel tank internals.

From £751.30 £626.08
Jotun Penguard Express
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.

From £55.56 £46.30
Hempel Hempadur Mastic 45880
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.

From £63.74 £53.12
Jotun Tankguard HB Classic Formerly Tankguard HB
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

From £344.88 £287.40
Jotun Jotamastic Smart Pack
A 2 pack high build anti-corrosive epoxy mastic which can be applied in high film thicknesses for smaller maintenance and repair jobs.

From £126.36 £105.30
Jotun Jotamastic 90 WG Wintergrade
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.

From £73.73 £61.44

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)