*Nullifire SC902 Intumescent Steel Coating

SKU id17649 ***
A low VOC, one coat, 2 pack high build system for fast cure effective fire performance up to a 120 minute fire rating.

Product Description

Please note, this product is now unavailable via Promain.co.uk. This product is only available to approved and certified contractors.

Nullifire SC902 Intumescent Steel Coating is a low VOC, one coat, 2 pack high build system for fast cure effective fire performance up to a 120 minute fire rating.

Best Uses

Nullifire SC902 Intumescent Steel Coating provides a fast cure, off white, matt finish for intumescent fire protection on internal structural steel. This product is for professional use only by approved contractors. If you would like training or further information, contact our technical team on 01462 421333.

  • High build potential with all fire
  • Self priming system
  • Tolerant of  light rusting to steel up to 2 weeks post blasting
  • Eartly weather resistance - shower proof within 1 hour
  • Fast cure, even below 0°C - Touch dry in 1 hour

Application

Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the datasheets found on the technical tab.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Recommended Products To Use


Nullifire PM019 Primer For Blasted Steel Substrates

Nullifire PM019 Primer For Blasted Steel Substrates

A two component, anti corrosive transport primer for temporary protection of blasted steel substrates, which will be finis...

£281.21 (£337.45 Inc VAT)
Nullifire PM018 Primer or Top Seal Epoxy Coating

Nullifire PM018 Primer or Top Seal Epoxy Coating

A two component, heavy duty, high build modified epoxy coating for the protection of steel in corrosive environments.

£338.55 (£406.26 Inc VAT)
Nullifire TS134 Acrylic Polyurethane Top Seal

Nullifire TS134 Acrylic Polyurethane Top Seal

A high gloss, high solid polyurethane top seal for use in compatible Nullifire intumescent systems.

£68.22 (£81.86 Inc VAT)
Nullifire PM021 General Purpose Epoxy Primer

Nullifire PM021 General Purpose Epoxy Primer

An economical corrosion resistant primer for use on abrasive blasted steel as part of a Nullifire intumescent system.

£239.97 (£287.96 Inc VAT)