Centrecoat Thermoplastic Line Marking Tape

SKU
ID3439
Non Hazardous
A superior quality reflective Thermoplastic Road Line Marking Tape for Car Park and Highway Marking. Manufactured in the UK
Available in Various Widths - Bulk discounts available for quarter, half or full pallets!
From £12.70 £10.58
In stock
Only %1 left
Product Description

Centrecoat Thermoplastic Line Marking Tape is Lead Free, reflective and suitable for road lines, car parks, footpaths, school playgrounds cycleways, airports and most concrete or tarmac surfaces - see video.

Manufactured in the UK - this is not a cheap imported product. It has a 20 year proven track record, offering superior colour fastness and durability. The UK's best selling Thermoplastic Line Marking Tape.

The advanced formulation of our best selling thermoplastic rolls has been extensively laboratory tested to offer much greater flexibility and far less chance of the rolls breaking than any other thermoplastic line marking available in the UK.

Centrecoat Thermoplastic Line Marking Tape is lead free and designed for use on roads and car parks as traffic paint and is available in Blue, Black, Red, Yellow and White. With a fast curing time, excellent abrasion qualities and durability, this Line Marking Tape provides a cost effective way of line marking for traffic and is ideal for use as a playground line tape or car park line tape. Suitable for new markings, car parks, ports, footpaths, corporate logos, playgrounds, cycleways, airports, and hard concrete or tarmac sports surfaces. Green RAL 6016 by special order only. 

Best Uses

Centrecoat Thermoplastic Line Marking Tape is ideal for highway marking reinstatement, new road markings, car parks, footpaths, cycleways, airports, ports, playgrounds and hard sports surfaces. Fast permanent reinstatement of road markings, requiring only one person and a Thermoplastic Gas Torch - very cost effective. Clean, crisp road markings, created in minutes, that can be used almost immediately.

Please note, if you would like to apply this product on concrete, use of tack coat primer is required.

Application

Thermoplastic Line Marking Tape should only be applied by using the correct Thermoplastic Gas Torch (please see related products) to melt the tape on to the substrate. It is not possible for this product to be applied with a plumbers type gas torch. After a few minutes the area is ready to return to service. Due to the nature of application, Thermoplastic Line Marking Tape can be applied all year round, even in cold conditions. When the temperature is below 10°C, it is advised to warm the tarmac surface with the gas torch before applying the thermoplastic tape. Also if the surface is wet, dry with the gas torch before application.

Centrecoat Thermoplastic lead free Line Marking Tape has a curing time of 10 minutes resulting in a fast return to service. Preformed thermoplastic must be applied at between 190- 200°C to ensure good adhesion. Thermoplastic lines must be stored at a minimum of 10°C or they become brittle. DO NOT APPLY OVER EXISTING PAINTED LINES.

Apply with the glass beads facing upwards.

  • Extremely durable - complies with New Roads and Streets Act 1991 code of practice for reinstatement
  • Suitable for application to highways
  • Manufactured in the UK not a cheap imported product
  • LEAD FREE    
  • Hard wearing - will last for years
  • Cadmium free - no heavy metals. Organic pigments only
  • Ready for use within minutes of application
  • Offers a clear cut edge 
  • Can be applied year round, even in cold conditions
  • A tack coat must be applied to: concrete, old or polished asphalt and previously dirty surfaces
  • Not suitable for new asphalt until the surface has settled for at least 6-8 weeks
  • Resistant to solar, water, oil, petrol, salt and adverse weather conditions
  • Built in reflective glass beads
  • Reflective glass beads can be applied to other colours during heating
  • Superior colour fastness 
  • Black Thermoplastic Line can be used to black out existing markings

For application of line marking to block paving, consider using Centrecoat ST1 Water based Line Marking Paint as an alternative.

Surface and Environment

Centrecoat Thermoplastic Line Marking Tape can be applied to all concrete, tarmac and asphalt surfaces, preferably in an external environment. Ready to withstand traffic and pedestrian use within minutes of application. Offers extreme resistance to sunlight, water, oil, petrol, salt and adverse weathering from rain, snow and ice.

Anti-Skid additive can be added to the preformed thermoplastic material instead of the reflective glass beads to provide an anti slip finish. The preformed thermoplastic rolls can then be applied onto most horizontal surfaces, including steel and iron, and provides very high levels of slip and skid resistance.

Thermoplastic Anti-Skid provides a cost effective solution to the reinstatement of patches of high friction areas on the highway, improvement in slip resistance of service covers such as manholes, fire hydrants and utility service hatches and provides both a visual and slip resistant finish to the edges of steps and stairs.

Bulk Purchases

There are huge discounts to be had when purchasing Thermoplastic Line Marking Tape in bulk. See our cost breakdown table on the Technical Tab above to find out just how much you could save. Plus we are currently offering FREE delivery on orders of Full Pallets, giving you an even bigger saving!

Technical Details

Cost Breakdown

Roll Size Pack Quantity Pack Cost Cost Per Roll Cost Saving
5m x 100mm 1 Roll £10.58 £10.58 -
  10 Rolls £95.20 £9.52 £10.60
  90 Rolls £837.90 £9.31 £114.30
  180 Rolls £1522.80 £8.46 £381.60
  360 Rolls £2430.00 £7.61 £1378.80
5m x 75mm 1 Roll £15.00 £15.00 -
  10 Rolls £105.00 £10.50 £45.00
  90 Rolls £900.00 £10.00 £450.00
  180 Rolls £1710.00 £9.50 £990.00
  360 Rolls £3060.00 £8.50 £2340.00
5m x 50mm 1 Roll £10.75 £10.75 -
  20 Rolls £200.00 £10.00 £15.00
  180 Rolls £1620.00 £9.00 £315.00
  360 Rolls £2880.00 £8.00 £990.00
  720 Rolls £5040.00 £7.00 £2700.00

Free delivery on Full Pallets!

Technical Info

Components: Thermoplastic Rolls
Type: Lead Free
Finish: Reflective
Stock Colours: White, Black, Blue, Green, Primrose, Red, Yellow
Suitable Substrates: Concrete, Tarmac and Asphalt Surfaces*
Surface Notes: *New asphalt must have settled for at least 6-8 weeks
Application Method: Must be applied with a Thermoplastic Gas Torch. DO NOT apply over existing painted lines.
Additional Requirements: A tack coat must be applied to: concrete, old or polished asphalt and previously dirty surfaces
Required Temperature: Preformed thermoplastic must be applied at between 190-200°C to ensure good adhesion
Theoretical Coverage: Available in standard 5m long rolls
Width: Available in 50mm, 75mm or 100mm (standard) widths. 1m rolls are available by special request.
Drying Time: Approximately 5 minutes
Fully Cured: Ready for use within minutes of application
Storage: Thermoplastic lines should be stored at a minimum of 10°C, or they may become brittle
Product Video

Related Products