LUL APR Bridges and Structures

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

A high quality, fast drying, acrylic urethane exterior gloss. Good colour retention. N9, M24, M34 and No.168. approved.

Used as a temporary protective coating for steel surfaces prepared by abrasive blast cleaning.

A two component high solids aluminium pigmented polyamine cured modified epoxy primer. Highways Item 115.

Epoxy with glass flakes for blast-cleaned and protected steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).

A 2 pack high build semigloss aliphatic acrylic polyurethane finish, Highways Approved Item No.169.

A 2 pack epoxy undercoat, pigmented with MIO (micaceous iron oxide). Network Rail Item No. 7.2.2 and 7.1.7.

A high build, 2 pack, anti-corrosive, zinc phosphate primer / build coat. For carbon steel. LUL, M24, N20, M20 approved.

A sulphate resistant, fibre reinforced shrinkage compensated thixotropic mortar for the repair of concrete – class R4.

An epoxy MIO surface tolerant epoxy protective system suitable for low temperature curing.

A medium strength (40 MPa), shrinkage-compensated, fibre reinforced, thixotropic mortar for concrete class R3.