Rustoleum CombiColor Hammertone offers a hammered finish with a high level of protection lasting for years that can be applied in a matter of minutes.
Rustoleum CombiColor Hammertone is part of the extensive range of Topcoat paints from Rustoleum, brought to you in a can for quick and easy application. Rustoleum CombiColor Hammertone can applied to a number of surfaces to produce a great Hammertone finish, in a selection of 5 different colours.
Rustoleum CombiColor Hammertone is best used to provide surfaces with a Hammertone finish in either light blue, white, dark grey, light grey or black. Rustoleum CombiColor Hammertone is especially ideal for providing a fresh finish to small objects or simply to provide touch ups to scratched or chipped surfaces that already have a hammertone finish.
Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Prime or spot prime with the recommended RUST-OLEUM Primers. Sand intact coatings to provide a proper key for adhesion. The surface must be clean and dry during application. Galvanised,Zinc and Aluminium surfaces have to be primed first with CombiPrimer Tack Coat 3302.
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply several thin layers at a few minutes interval to achieve adequate coating thickness. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
Surface and Environment
Rustoleum CombiColor Hammertone can be used in a number of different environments to provide a quick and easy way to restore or decorate different substrates. Use Rustoleum CombiColor Hammertone Topcoat on bare, rusted, or galvanised metals to offer protection internally or externally. Rustoleum CombiColor Hammertone offers a high level of protection for years that can be applied in a matter of minutes.
- Rustoleum CombiColor Metal paint aerosol
- Metal protection for years...in minutes
- Primer and topcoat in one
- Rustoleum CombiColor hides in one cross layer
- Ideal for touch-up and small objects
- Usable down to 5°C.
|Stock Colours:||Light Blue, Black, Light Grey, Dark Grey, White|
|Suitable Substrates:||Bare or blasted metal, Prepainted metal, Rusted metal|
|Application Method:||Air-atomised Spraygun, Brush, Roller|
|Theoretical Coverage:||2-3 m2 per aerosol|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Dry To Handle:||4 hours at 20°C|
|Dry To Recoat:||After 2 hours at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||-|
|Shelf Life:||5 years from date of production in unopened cans, if stored in dry well ventilated areas away from direct sunlight|
|Packaging:||Available in packs of 6 x 400ml cans|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.