£9.95 delivery on orders excluding certain products & postcodes *
Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.
A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.
A quick drying two component epoxy primer for immersed or exposed conditions within a system.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.
A high volume solids, 2 pack catalysed epoxy, capable of being applied up to 3000 microns DFT on marine decks.
A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection.
A two component product giving excellent durability and long term recoatability.
A one pack alkyd primer containing zinc phosphate anti-corrosive pigment.
A functional coating for identification of hot spots and internal insulation failures.
Provides up to two hours cellulosic fire protection on various steel sections exposed in interior environments.
A high build, ‘cold spray’ applied coating, capable of providing corrosion protection.
Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.
A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.
A two pack, silicone elastomer tie coat for new building or maintenance and repair.
A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.
A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.
A fast curing epoxy primer for use with International 3200 product series.
A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.
Formulated as a cosmetic finish above water in marine environments. NORSOK approved.