Full Product Catalogue

Patio Decking Hard Surface Restorer for walls, floors, paths, roofs, decking, paving, boats and monuments.

Thermoplastic snakes and ladders. Ideal for use in School Playgrounds. Available in 2 sizes.

Thermoplastic arrows for roads, car parks and playground logos, custom made to your design and size.

A quick and flexible solution to the repair of anti - skid surfacing. Ideal to gain slip resistance on disability ramps, footbridges, etc.

100% biodegradable, a safe alternative to acid etch for power floated floors.

A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.

For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.

High quality, durable, preformed road marking. Fast to apply ensures minimal downtime.

High quality, durable, preformed road marking. Fast to apply ensures minimal downtime.

High quality, durable, preformed road marking. Fast to apply ensures minimal downtime.

High quality, durable, preformed road marking. Fast to apply ensures minimal downtime

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.

A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A three pack methacrylate resin coating suitable for use in freezer grade environments down to -40°C.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.

A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.

A two pack, fast curing flexible coating for tarmac or asphalt surfaces such as balconies.

A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.

Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.

A very fast curing fire resistant and slip resistant coating offering a full return to service after just 2 hours.

Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.

Propane gas torches for use with thermoplastic line marking and thermoplastic signs.

A two pack primer formulated to prepare oil contaminated floors prior to application of subsequent Centrecoat floor coatings.

Formulated for rapid and permanent repairs to concrete and masonry surfaces.

A two pack, fast curing flexible coating for line marking paint for concrete surfaces.