£9.95 delivery on orders excluding certain products & postcodes *
A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.
A single pack paint formulated with nitro-cellulose fast drying top coat designed for the protection of ferrous substrates.
A single pack primer that provides excellent protection on bare steel, black steel, light industrial equipment.
A 2 pack Polyurethane Matt Topcoat offering good resistance to harsh atmospheric conditions and chemical attack.
Selemix Direct Hardener 9-020 for use with Selemix range of 2 pack paints.
Selemix thinner 1-400 has been specially blended for use with Selemix paints.
Selemix Thinner 1-420 for use with Selemix Topcoats 1.775.1000, 7-510, 1.775.1100, 7-511, 1.775.1200, 7-512.
Hammer effect additive will provide a hammer effect finish ideal for application on to light industrial equipment.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
Additive can be added to compatible Selemix paints to allow them to be applied via Electrostatic spray equipment.
Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.
A water based polyurethane coating which can be applied direct to suitably prepared steel.
A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...
Selemix Direct Hardener 9-060 for use with Selemix range of 2 pack paints.
Selemix Direct Hardener 9-080 for use with Selemix range of 2 pack paints.
For use with Selemix Aqua range of 2 pack paints when painting large areas.
A compatible thinner for Selemix Direct, Selemix 7-110 and Selemix 7-510.
A very high gloss, excellent colour fast and resistance to atmospheric attack product.
Apply wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.