Full Product Catalogue

A two component primer which is ideal for speeding up production and throughput.

An epoxy primer which provides optimised control where thin film application is required.

A fast curing epoxy primer for use with International 3200 product series.

An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.

A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.

A patented cosmetic finish that provides superior gloss and colour retention on marine projects.

A two component epoxy sealer coat pigmented with aluminium flake.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two component acrylic polyurethane finish giving excellent durability and long term recoatability.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.

A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A two component epoxy sealer coat, pigmented with micaceous iron oxide.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, high solids, high build, two component epoxy coating.

A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.

A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...