£9.95 delivery on orders excluding certain products & postcodes *
An epoxy primer which provides optimised control where thin film application is required.
A fast curing epoxy primer for use with International 3200 product series.
An anti-corrosive which can be applied directly to mechanically prepared shop primer or suitably prepared bare steel.
A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.
A patented cosmetic finish that provides superior gloss and colour retention on marine projects.
A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
A 2 pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.
A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two part, high solids, low VOC epoxy micaceous iron oxide intermediate coating.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A tough, hard wearing finish coat for application over properly primed surfaces.
For use on a wide variety of substrates including hand prepared rusty steel.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.
A tough 2 pack epoxy finish coat For concrete that offers good abrasion and chemical resistance in corrosive environments.
Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.