Full Product Catalogue

For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.

A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.

A low viscosity Primer/Saturant for steel and concrete.

A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, high solids low VOC epoxy micaceous iron oxide.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

A two pack epoxy filler for pitted steel or as an anode shield in marine environments.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.

A two component, low VOC, high solids, fast drying polyaspartic gloss primer/finish coating.

A low VOC, high solids, rapid cure primer/finish. Excellent anti-corrosive qualities and long term colour / gloss durability.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

A high performance, low VOC, water borne 2 pack epoxy with a high gloss finish for structural steel and concrete floors.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.

A tough, hard wearing finish coat for application over properly primed surfaces.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

For use on a wide variety of substrates including hand prepared rusty steel.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

A solvent free coating designed for installation onto steel or concrete surfaces.

A solvent free coating designed for installation onto steel or concrete surfaces.