Full Product Catalogue

A two component epoxy for use as a primer or coating for steel and concrete structures. Highways Approved Item No. 116

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

Waterborne intumescent coating for fire protection of structural steelwork.

Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.

A two component, solvent free epoxy which can be applied underwater and will cure underwater.

A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155

A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.

Intumescent coating for 60 minutes fire resistance to structural steelwork.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.

A high build quick air-drying oxide primer for use on ferrous metals.

A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.

A high gloss coach enamel available in historic colours.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A low viscosity Primer/Saturant for steel and concrete.

A single pack topcoat that will resist temperatures up to 600°C and can be applied direct to steel.

A high zinc content primer with outstanding resistance to severe weathering.