Full Product Catalogue

A solvent free, high build, two pack polyurethane mastic for steel, for the repair of pipe coatings and the coating of field joints.

A one component physically drying, fast drying vinyl coating that can be used as primer or mid coat in atmospheric and immersed environments.

A premium, high gloss marine enamel for use on all boat marine substrates above the waterline.

A versatile quick drying, single pack anti-corrosive primer for steel.

A primer and top coat in one, which can be applied direct to bare, previously painted or rusted surface and provides a smooth, flat, semi-gloss finish...

A high performance single pack water based rust converter. Suitable for use on structural steel and machinery.

An industrial detergent used for degreasing oily or soiled surfaces prior to painting.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

A two component, anti-corrosive metallic zinc rich epoxy primer.

A two pack epoxy zinc phosphate primer, primarily formulated to meet the requirements of the UK Highways Agency specification.

For new unpainted zinc coated/galvanized sheet-iron and steel surfaces.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

A tough, hard wearing finish coat for application over properly primed surfaces.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

A low VOC, two component, internally flexibilised, high build, low temperature curing (down to -5°C), surface tolerant epoxy primer.

A two component, metallic zinc primer for steel in aggressive environments.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

A quick drying two component epoxy primer for immersed or exposed conditions within a system.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

For application to steel tank internals.

A two component, high solids low VOC epoxy micaceous iron oxide.

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.