NORSOK Approved Paints

Home
Marine Paints / Cleaners
NORSOK Approved Paints

Download the manufacturer specifications for NORSOK M-501 certified systems below:

Jotun Hardtop Pro
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.

From £169.39 £141.16
Carboline Thermaline 4700 Aluminium
A single pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

£89.40 £74.50
Carboline Thermaline 450
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.

From £251.46 £209.55
Carboline Phenoline 353 LT
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.

£313.80 £261.50
Jotun Jotamastic 87 Aluminium WG
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.

From £83.80 £69.83
Jotun Penguard Pro
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.

From £363.65 £303.04
International Intergard 410
A high build, high performance, two component epoxy with excellent chemical and abrasion resistance.

From £99.60 £83.00
International Intergard 475HS
A low VOC, high solids, high build, two component epoxy coating.

From £318.67 £265.56
International Intergard 740
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.

From £443.78 £369.82
International Intershield 300
A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...

From £398.16 £331.80
International Intergard 269
A quick drying two component epoxy primer for immersed or exposed conditions within a system.

From £79.68 £66.40
Jotun Jota Armour Standard
A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.

From £190.84 £159.03
Jotun Tankguard HB Classic Formerly Tankguard HB
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.

From £344.88 £287.40
Jotun Jotamastic 80 Aluminium
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.

From £57.76 £48.13
Sherwin Williams Zinc Clad II EU Ethyl Zinc Silicate Primer
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.

From £227.36 £189.47

System 1 (pre-qualified)	Carbon steel with maximum operating temperature < 120°C (248°F) Structural steel Exteriors of equipment, vessels, piping and valves (not insulated)
System 2	Carbon steel surfaces exposed to operating temperatures > 120°C (248°F)
System 3A-3G (System 3B pre-qualified)	Internal surface of carbon steel tanks
System 4 (pre-qualified)	Walkways, escape routes and lay down areas
System 5A (pre-qualified)	Epoxy-based fire protection
System 5B (pre-qualified)	Cement-based fire protection
System 6A	Uninsulated stainless steel when painting is required. Aluminum when painting is required
System 6B	Hot-dipped, galvanized steel when painting is required
System 6C	Insulated stainless steel piping and vessels at temperatures < 150°C (302°F)
System 7A (pre-qualified)	Carbon and stainless steel in the splash zone
System 7B (pre-qualified)	Submerged carbon and stainless steel ≤ 50°C (122°F)
System 7C (pre-qualified)	Submerged carbon and stainless steel > 50°C (122°F)
System 8a	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in internal and fully dry and ventilated areas
System 8b	Structural carbon steel with maximum operating temperature ≤ 80°C (176°F) in fully dry and ventilated areas
System 9	Bulk-supplied carbon steel valves with maximum operating temperature up to 150°C (302°F)