£7.75 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
Two component high solids, high build, polyamide cured epoxy coating designed for general purpose protection to steel and concrete structures.
This product is now discontinued. See Jotun Marathon 550 as a potential alternative.
A tough, hard wearing finish coat for application over properly primed surfaces.
A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
Suitable for use as a finishing coat for protection of structural steel.
A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
Specially designed as a universal, all round, new construction coating. Can be used as primer, mid coat, finish coat or as single coat system.