This product is now discontinued. Please contact us for a suitable alternative.
Nullifire S605 Intumescent Basecoat is a single pack, solvent based intumescent coating for internal and external structural steel fire protection.
Nullifire S605 Intumescent Basecoat provides effective structural fire protection for steelwork, ranging from 60 minutes to 120 minutes depending on loadings. This system is suitable for universal and hollow steel sections. Nullifire S605 is available in a very pale green colour. For long term durability and external use, a compatible Nullifire top sealer is required.
Suitable for both internal and external structural steel.
Apply on steel between 5 - 35°C - air temperature should be within these figures also. Please contact our technical team for loadings information to ensure your project is sufficiently protected against fire for the times recommended by building control. Apply using either airless spray equipment, brush or roller following the data sheets found on the technical tab.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
Please contact our technical team prior to discuss your requirements in regards fire protection internally.
- Nullifire PM015 Primer
- Nullifire PM018 Primer
- Nullifire PM019 Primer
- Nullifire PM020 Primer
- Nullifire PM021 Primer
Suitable Top Sealers
- Nullifire PM018
- Nullifire TS134 Acrylic Polymer
- Nullifire TS815 Modified Acrylic
|Stock Colours:||Pale Green|
|VOC Content:||1.0g per Litre|
|Suitable Substrates:||For internal and external structural steel|
|Application Method:||Airless Spray, Brush or Roller|
|Theoretical Coverage:||730g per m2 based on 0.5mm DFT|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Cleaner / Thinner:||Use Nullifire FC150 to clean equipment. Do not thin.|
|Shelf Life:||12 - 15 months in original unopened packaging|
|Packaging:||Available in 25 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.