*Rustoleum Trade Premium Cover Emulsion

SKU id21805 ***
This product is now discontinued.

Product Description

Please note, this product is now discontinued.

Rustoleum Premium Cover Emulsion is a trade, long lasting wall and ceiling paint offering excellent hiding power based on synthetic resin dispersion. Available in Matt and Satin finishes.

Best Uses

Rustoleum Premium Cover Emulsion is a wall paint offering excellent hiding power based on synthetic resin dispersion. A single coat is generally sufficient, saving time and the cost of an extra coat. Low-odour, breathable and easy to clean. Designed specifically to provide a long-lasting finish to interior walls and ceilings. For interior use.

Rustoleum Premium Cover Emulsion is suitable for coating existing coats of wall paint, cement and plasterwork, concrete, brick, gypsum panelling, board, etc. Also suitable for painting glass fibre fabric.

Application

The surface must be capable of supporting the paint, completely set, clean, dry, and free of dust or grease. Repair cracks and surface irregularities. Remove and/or repair all loose and unstable coats.

For new, untreated substrates

  • Prime (highly) absorbent surfaces in their entirety using Fixator
  • Thoroughly clean powdery surfaces. Prime using Fixator after allowing to dry
  • Apply the top coat after allowing to dry

For existing intact coats of wall paint

  • Clean
  • Apply an intermediate coat of Premium Cover if necessary
  • Apply the top coat after allowing to dry

For existing, non-load-bearing coats of wall paint

  • Remove loose parts
  • Thoroughly wash powdery coats and allow them to dry
  • Carry out any repairs
  • Prime with Fixator
  • Apply the top coat after allowing to dry

For areas with contamination caused by nicotine, damp, rust or soot

  • Clean thoroughly.
  • Treat surface/stain with Insulator.

The systems described above apply for the most common types of surface. For specific applications and/or detailed advice, please contact our technical team.

Stir thoroughly prior to use. The first coat can be diluted with a maximum of 10% water. Apply in 1 or 2 coats using a suitable brush, paint roller or paint sprayer. Always work wet-on-wet to prevent marks in the paint. Back-roll all overlaps in the same direction. Do not touch up when drying.

Recommended Products To Use


*Rustoleum Trade Premium Cover Soft

*Rustoleum Trade Premium Cover Soft

This product is now discontinued.

£27.14 (£32.57 Inc VAT)
*Rustoleum Trade Premium Cover Masonry Matt

*Rustoleum Trade Premium Cover Masonry Matt

This product is now discontinued.

£22.97 (£27.56 Inc VAT)
*Rustoleum Trade Premium Cover Masonry Satin

*Rustoleum Trade Premium Cover Masonry Satin

This product is now discontinued.

£32.36 (£38.83 Inc VAT)
*Rustoleum Trade Premium Cover Primer

*Rustoleum Trade Premium Cover Primer

This product is now discontinued.

£16.18 (£19.42 Inc VAT)