Full Product Catalogue

Thinner suitable for acrylic paints in the Selemix range of products.

An accelerated thinner for Selemix Direct 7-53x.

An additive for Selemix topcoats to help eliminate foaming.

Single Pack One-Stage Semi-Gloss, apply directly to suitably prepared bare steel and old finishes, touch dry in 40-60 minutes.

Slow reactive thinner for use with Selemix Direct Pro 7-159.

Suitable thinner for use with Selemix Direct Pro 7-159.

Slow hardener for Selemix Direct Pro 7-159.

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

Selemix Direct Hardener 9-070 for use with Selemix Direct Topcoat..

A very high gloss, excellent colour fast and resistance to atmospheric attack product, available in RAL, BS 4800 or NCS Colours.

A single pack paint formulated with nitro-cellulose fast drying top coat designed for the protection of ferrous substrates.

Thinner suitable for acrylic paints in the Selemix range of products.

A single pack primer that provides excellent protection on bare steel, black steel, light industrial equipment.

A 2 pack Polyurethane Matt Topcoat offering good resistance to harsh atmospheric conditions and chemical attack.

7-413 can be applied wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.

Thinner suitable for acrylic paints in the Selemix range of products.

Selemix Thinner 1-215 for use with Selemix paints.

Selemix Direct Hardener 9-020 for use with Selemix range of 2 pack paints.

Selemix thinner 1-400 has been specially blended for use with Selemix paints.

Selemix Thinner 1-610 for use with Selemix synthetic paints.

Selemix Thinner 1-420 for use with Selemix Topcoats 1.775.1000, 7-510, 1.775.1100, 7-511, 1.775.1200, 7-512.

Formulated to be added to Selemix range of single pack synthetic primers and topcoats to make them suitable for application by brush or roller.

Hammer effect additive will provide a hammer effect finish ideal for application on to light industrial equipment.

Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.

Additive can be added to compatible Selemix paints to allow them to be applied via Electrostatic spray equipment.

Additive can be added to all Selemix single and two pack topcoats to provide a textured finish with abrasion resistance.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.