Full Product Catalogue

An additive for Selemix topcoats to help eliminate foaming.

A high zinc content primer with outstanding resistance to severe weathering.

High-performance 2K acrylic polyurethane clearcoats designed to achieve from very high gloss to very matt finish.

A 2K high build epoxy primer containing anticorrosive pigments.

A fast drying synthetic primer with excellent adhesion properties and is recommended for application on bare ferrous steel.

Selemix degreaser for preparing substrates ready for Selemix primers and topcoat systems.

Thinner suitable for use with the Selemix Direct Pro range.

Thinner suitable for use with the Selemix Direct Pro range.

Provides a short flash-off between coats and prior baking in a short time for Selemix 8-110 Gloss and 8-111 Matt.

Thinner suitable for acrylic paints in the Selemix range of products.

An accelerated thinner for Selemix Direct 7-53x.

A single pack, fast drying, high filling primer with anti-corrosive properties ideal for the protection of ferrous substrates.

Selemix Direct Hardener 9-120 for use with Selemix range of 2 pack paints.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

A water based polyurethane coating which can be applied direct to suitably prepared steel.

This Primer has good resistance to water, solvents and abrasion and is ideal for protecting ferrous steel in aggressive environments.

Based on high solid resins and is low VOC with excellent sag resistance and a gloss finish, ideal for the protection of ferrous steel.

A fast drying waterborne top coat with chemical and mechanical damage resistance equal to solvent based equivalents, ideal for the protection of agric...

An easy to apply topcoat with a high gloss finish and is ideal for the protection of ferrous steel and in particular plant and agricultural equipment....

Excellent adhesion and a high gloss finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.

Excellent adhesion and a matt finish ideal for protecting ferrous steel and in particular agricultural and plant equipment.

Selemix Direct Hardener 9-075 for use with Selemix Direct Topcoat.

Selemix Direct Hardener 9-060 for use with Selemix range of 2 pack paints.

Selemix Direct Hardener 9-080 for use with Selemix range of 2 pack paints.

An easy to apply, high filling primer with excellent anti corrosive properties, ideal for protecting ferrous steel from the elements.

For use with Selemix Aqua range of 2 pack paints when painting large areas.

A compatible thinner for Selemix Direct, Selemix 7-510, Selemix 2.705.0502, Selemix 7-512 and Selemix 7-550 UHS Polyurethane Topcoat.

A compatible thinner for Selemix Direct, Selemix 7-110 and Selemix 7-510.