£7.75 delivery on orders excluding certain products & postcodes *
A tough two component epoxy finish coat suitable for concrete that offers good abrasion and chemical resistance in corrosive environments.
Provides excellent long-term colour / gloss retention. Extended lifetime to first maintenance as part of a high end anti-corrosive system.
A single pack alkyd high gloss finish suitable as a easily maintained cosmetic finish coat on areas above the waterline.
A fast drying, single pack modified acrylic cosmetic finish for above the waterline in marine environments.
A surface tolerant, one pack primer. Compatible with a wide range of International finishes.
A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.
A functional coating for identification of hot spots and internal insulation failures.
A tough, hard wearing finish coat for application over properly primed surfaces.
A solvent free coating designed for installation onto steel or concrete surfaces.
For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.
A cleaning solvent for use after application of International Paints products.
A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.
A two pack epoxy primer/finish offering corrosion protection in one coat.
A universal pipe coating that provides external protection for process piping, valves and vessels.
For corrosion protection for the internals of steel storage tanks, vessels, spools, pipes and rail cars.
Intended to provide high corrosion protection, with a rapid cure in a single coat scheme.
Reinforced coating to provide tank bottom refurbishment with a 14 hour return to service.
Provides corrosion protection for the internals of steel storage tanks and pipes for a range of products.
Provides rapid cure and overcoating even under low temperature conditions.
A VOC compliant, single component, water based anti-corrosive primer/finish.
A single component, water based acrylic finish for use in industrial environments.
A high volume solids, 2 pack catalysed epoxy, capable of being applied up to 3000 microns DFT on marine decks.