Full Product Catalogue

For use under Thermoguard Smoke & Flame Retardant Matt and Thermoguard Smoke & Flame Retardant Eggshell.

Upgrades bare and suitable multi-later painting wood and wood derivatives to be protected for 30 and / or 60 minutes against the effects of fire.

A clear, colourless, penetrating fire protection for external bare wood.

A water-based intumescent paint, optimised to protect I beams, channel, shaped steel and hollow bracing.

A low-odour, water-based coating for use within a water based 90 minute fire protection system on structural steel and cast iron.

A solvent based intumescent coating for use on structural steel and cast iron within a Thermoguard solvent based intumescent paint system up to 90 min...

An eggshell flame retardant topcoat finish to protect, seal and decorate over Thermoguard base coats within a system for 30 or 60 minute fire protecti...

An gloss flame retardant topcoat finish to protect, seal and decorate over Thermoguard base coats within a system for 30 or 60 minute fire protection....

A decorative topcoat finish for use in a Thermoguard 30 - 60 minute fire protection system.

Provides a permanently ideal surface on steel for intumescent paint adhesion within a Thermoguard paint system.

Part of a two-coat system for wood and wood based boards with a Thermoguard intumescent paint system for wood.

The clear topcoat component of Thermoguard's fire varnish system for interior and exterior wood. To be used over Thermoguard Fire Varnish 2K Basecoat....

The clear basecoat component of Thermoguard's fire varnish system for interior and exterior wood. To be used under Thermoguard Fire Varnish Overcoat.

For sealing asbestos products such as internal wall panels, top and underside of ceiling panels, rigid internal ducts or pipework, and external wall s...

A single pack intumescent acrylic mastic for sealing gaps around fire doors, window frames and for sealing joints, voids and irregular holes in fire r...

Formulated to achieve EN Class B s1 d0 as part of a two-coat fire protection system on walls.

A non-flammable, safe to handle paint stripper for removing all types of water and oil-based coatings including adhesives.

Formulated to prepare bare dry wall and unsealed bare plaster prior to the application of fire upgrade systems by Thermoguard.

A decorative finish for application formulated to be applied over Thermoguard Safewalls Insulating Basecoat or Thermoguard 30/60 Basecoat.

A decorative topcoat for use over Thermoguard Safewalls Insulating Basecoat.

The basecoat within a Thermoguard fire protection system for interior plasterboard and cement board ceiling and wall surfaces.

A decorative fire upgrade and finish in one coat.