Full Product Catalogue

A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A one component waterborne acrylic thin film 90 minute intumescent coating.

A solvent based intumescent coating for structural steel exposed to internal environments up to corrosivity category C4 (ISO 12944-2).

A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109

A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A single pack, aluminium pigmented silicone resin coating that is heat resistant up to 540°C.

A high-performance, water based acrylic floor paint for floors, driveways and paths. Recoatable in just 1 hour.

A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.

A one part, solvent borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires.

A water based white basecoat for the protection of internal structural steelwork in C1 and C2 environments. Fire resist up to 120 minutes.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

A one component solvent based acrylic thin film intumescent coating.

Waterborne intumescent coating for fire protection of structural steelwork.

A high build quick air-drying oxide primer for use on ferrous metals.

A one pack acrylic thin film base coating for the protection for internal and semi exposed structural steelwork up to 60mins.

A two component epoxy mastic coating for repair and maintenance.

Suitable for use in a range of markets where durable performance and aesthetics are needed.