Full Product Catalogue

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.

2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.

A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).

A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.

A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.

A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.

An interior/exterior adhesion primer. For all interior and exterior walls, ceilings, doors, trim, fascia, soffits, galvanised steel, railings etc.

A 1 pack, high build bituminous product. For use behind linings / cofferdams. Protects enclosed steel. Highways Agency No141.

Fast drying acrylic resin aerosols. Provides a bright metallic appearance with the durable protection of a standard topcoat.

A 1 pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.

2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.

A water-borne anti-corrosive paint for direct to metal application. Tintable to thousands of shades.

A tough, hard wearing finish coat for application over properly primed surfaces.

A surface tolerant, one pack primer. Compatible with a wide range of International finishes.

A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.

Slow reactive thinner for use with Selemix Direct Pro 7-159.

Suitable thinner for use with Selemix Direct Pro 7-159.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.

For use on a wide variety of substrates including hand prepared rusty steel.

A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.

A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.

Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.