£9.95 delivery on orders excluding certain products & postcodes *
A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.
A low VOC, 2 pack, internally flexibilised, high build, low temperature curing down to -5°C.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A 2 pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A 2 pack epoxy paint, which combines high volume solids with a short drying time. Contains zinc phosphate for better corrosion protection.
A 2 pack, epoxy high build solvent based primer and undercoat. Ideal for the prevention and repair of osmotic blistering in glass fibre.
A high solids, 2 pack epoxy brushing and spraying mastic, with micronised glass flake, aluminium and anti corrosives.
An interior/exterior adhesion primer. For all interior and exterior walls, ceilings, doors, trim, fascia, soffits, galvanised steel, railings etc.
A 1 pack, high build bituminous product. For use behind linings / cofferdams. Protects enclosed steel. Highways Agency No141.
Fast drying acrylic resin aerosols. Provides a bright metallic appearance with the durable protection of a standard topcoat.
A 1 pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.
2 pack polyamide cured, zinc rich coating suitable for structural steel or piping exposed in corrosivity categories up to C5.
A water-borne anti-corrosive paint for direct to metal application. Tintable to thousands of shades.
A tough, hard wearing finish coat for application over properly primed surfaces.
A surface tolerant, one pack primer. Compatible with a wide range of International finishes.
A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.
Suitable thinner for use with Selemix Direct Pro 7-159.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
For use on a wide variety of substrates including hand prepared rusty steel.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A primer, intermediate or finishing coat in Hempatex systems in moderately corrosive environment.
A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.
Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
Advanced coating offers quicker drying and reduced risk when curing at sub-zero temperatures.