Full Product Catalogue

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.

A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A three pack methacrylate resin coating suitable for use in freezer grade environments down to -40°C.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.

A two pack, fast curing flexible coating for tarmac or asphalt surfaces such as balconies.

A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.

Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.

A very fast curing fire resistant and slip resistant coating offering a full return to service after just 2 hours.

Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.

A two pack primer formulated to prepare oil contaminated floors prior to application of subsequent Centrecoat floor coatings.

An economical dust proofer for non-trafficked cementitious surfaces. Formulated for use as a primer under Fosroc Renderoc repair systems.

An oil / water resistant, flexible and UV resistant finish to concrete floors and block paving driveways.

Formulated for rapid and permanent repairs to concrete and masonry surfaces.

A two pack, fast curing flexible coating for line marking paint for concrete surfaces.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

A 2 part, low viscosity, multi-purpose epoxy resin primer for Sika flooring systems.

A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.

A durable, low odour, low emission line marking paint with a rapid through cure and return to service.

A two pack, water dispersible epoxy based primer / sealer / clear coating.

A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.

A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.

A 2 pack water based epoxy floor paint for concrete and polymer modified cementitious screeds. Category FeRFA Type 1 & 2.

A 2 part epoxy primer for use on flooring prior to application of Centrecoat Armourcoat 3-350.

Provides a tough, hard wearing coating for medium duty traffic giving high film build and wear resistance.

A one part, pre-blended, coloured synthetic dry shake hardener for concrete. For use on fresh, wet concrete.