Full Product Catalogue

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A 2 pack epoxy adhesion and stabilising primer, formulated for the maintenance and repair of architectural cladding.

A two component moisture curing inorganic zinc ethyl silicate coating. Heat resistant up to 540°C.

A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.

A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.

A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.

A fast drying anti slip floor coating that can be applied in low temperatures down to freezing.

A high build, 2 pack epoxy, zinc phosphate primer buildcoat for the anti corrosive protection of carbon steel surfaces.

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.

A high build, 2 pack epoxy, zinc phosphate primer / build coat for the anti corrosive protection of carbon steel surfaces. LUL, M24, N20, M20, approve...

A functional coating for identification of hot spots and internal insulation failures.

A single component, water-based rust remover / cleaner gel for a range of substrates.

A high end surface tolerant epoxy mastic for less severe exposures or when shorter maintenance intervals are expected in tougher environments.

A two component protective coating for use in high traffic, atmospheric and immersed environments.

A topcoat for use in atmospheric environments, on a wide range of industrial structures. Replaces Pioner Topcoat.

A one component solvent based acrylic thin film intumescent coating.

A self-priming coating for steel and concrete. Formerly PPG SigmaCover 640 / Amerlock 400C.

A two component epoxy mastic coating for repair and maintenance.

A single pack silicone acrylic heat resistant finish suitable for high temperature exposures up to 260°C on steel.

A 2 pack epoxy pheonlic coating for the internal coating of storage tanks and vessels.

A two component solvent free amine cured phenolic/novolac epoxy coating. Specially designed tank lining with very good chemical resistance.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

A one component physically drying acrylic, high build, fast drying coating with a matt finish for application direct to metal.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.

Formulated as a shop primer designed for very high welding and cutting speed, giving reduced weld porosity and back burning.