International Paints Primers & Tie Coats

A primer for vinyl ester schemes over both steel and concrete.

A low viscosity Primer/Saturant for steel and concrete.

Provides rapid cure and overcoating even under low temperature conditions.

This product is now discontinued.

A two pack, tar free, modified epoxy tie coat.

A high performance anti-corrosive zinc rich primer for heavy industry.

A 2 pack, high gloss, low VOC, high solids, fast curing, acrylic polyurethane primer / finish pigmented with zinc phosphate.

A high solids, abrasion resistant, aluminium pure epoxy primer. Provides excellent long term anti-corrosive protection and low temperature capability....

A solvent free, water based primer for correctly prepared steel.

A fast drying, rapid recoat, metallic zinc-rich epoxy primer. Replacement for Interzinc 52.

A two pack, silicone elastomer tie coat for new building or maintenance and repair.

An epoxy primer which provides optimised control where thin film application is required.

A fast curing epoxy primer for use with International 3200 product series.

A pure epoxy primer with anti-corrosive properties and overcoating intervals of up to 6 months.

A versatile, high performance maintenance coating.

A two pack epoxy abrasion resistant coating, containing micaceous iron oxide.

Epoxy barrier coat designed to give long term protection. LuL APR No. 2081.

A two component epoxy sealer coat pigmented with aluminium flake.

A low VOC epoxy primer for improved corrosion resistance. Highways Approved Item No. 115.

For use on a wide variety of substrates including hand prepared rusty steel.

A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.

A two component epoxy holding primer.

A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.

Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.

A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.

A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.