This product has now been discontinued. Please contact our Technical Team for details of an alternative product.
Sherwin Williams Firetex M95 - Formerly Leighs is a durable, 2 pack epoxy intumescent coating suitable for cellulosic fire protection to blast cleaned steel.
An exterior durable intumescent, which can be applied directly onto blast cleaned steel. Suitable for application in-shop and on site, provided the conditions listed below are adhered to. After application, unless a sealer coat is applied prior to exposure, the coating must be protected from the weather until the material reaches a shore D hardness of 50 in order to become exterior durable. Applications below 15°C may result in insuffi cient curing and reduced weather resistance and performance. See application conditions and overcoating.
Recommended application method via airless spray or trowel for small areas or touch up only. Do not thin. Indefinitely overcoatable with high performance systems provided the surfaces to be coated are free from all contaminants.
Where a high degree of gloss and colour retention is required overcoat with Acrolon C137V2 within 7 days at a minimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature. FIRETEX M95 is indefinitely overcoatable with itself.
IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.
- Certifire Approved – Certificate CF500
- For cellular beam fire protection consult our technical team
- Pot Life: 60 minutes at 15°C
- Drying Times: 8 hours at 15°C to touch, 8 hours at 15°C to recoat
- Colour: Pale Blue (White Base with Blue Additive)
- Available in 15 Litre units
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.