This product has now been discontinued. Please contact our technical team to discuss a potential alternative.
PPG Sigma Fluorescent Orange paint is a single pack, solvent based, light reflecting paint, that has been manufactured using fluorescent pigments and synthetic resins to produce a coating that can be seen easily, even during the day.
PPG Sigma Fluorescent is best used for visual purposes and advertising purposes and is ideal for producing words and images that can be seen easily in all kinds of lighting.
PPG Sigma Fluorescent can be applied using brush, roller or airless spray for a coating that is highly visible and fast drying in just 45 minutes, to touch. PPG Sigma Fluorescent has a theoretical coverage rate of 14.5m2 per litre and is available in 5 litre tins.
Surface and Environment
PPG Sigma Fluorescent can be used on most common hard surfaces and works particularly well when applied to degreased and sanded paint such as Sigma Marine in white, for a coating that stands out effectively.
- For visual purposes and advertising purposes
- Apply on a degreased and sanded paint such as Sigma Marine in white
- Please allow 5- 10 days for delivery.
|Stock Colours:||Red, Orange-Red, Orange, Green, Blue, Pink|
|Volume Solids:||51 +/1 2%|
|Suitable Substrates:||Most common hard surfaces|
|Application Method:||Brush, Roller, Air Spray|
|Theoretical Coverage:||14.5m2 per litre at 35 microns|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||35 Microns|
|Touch Dry:||45 minutes at 20°C|
|Overcoatable:||After minimum 24 hours at 20°C|
|Cleaner / Thinner:||Air Spray: Thinner 20-05. Brush Roller: No thinner should be added. Clean tools with Thinner 20-05|
|Shelf Life:||At least 12 months if stored in a cool, dry place|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.