This product has been discontinued. Please contact us for an alternative.
PPG Sigma PSX 1001 is a single pack acrylic polysiloxane finish suitable for interior and exterior use to create a high performance glossy finish in a variety of shades.
PPG Sigma PSX 1001 can be used commercially, domestically and industrial, indoors or outdoors to offer excellent weather resistance to a number of different surfaces. PPG Sigma PSX 1001 works to retain excellent colour retention even when exposed to weathering and strong atmospheric conditions for a long period of time.
PPG Sigma PSX 1001 can be applied using brush, roller or airless spray to produce an excellent gloss coating. PPG Sigma PSX 1001 has a drying time of just 2 hours and can be recoated after 16 hours. It does not matter if you don't recoat the surface straight away as you can recoat the surface anytime after this without the need for preparation.
Surface and Environment
PPG Sigma PSX 1001 can be used on all previously coated surfaces, internally or externally to provide, toughness, adhesion, corrosion resistance and chemical resistant too. This product is an all round performer that provides users with excellent environmental characteristics.
- Single pack acrylic polysiloxane finish
- Suitable for interior and exterior use
- Good weather resistance
- High opacity
- Good colour retention
- Single component
- Theoretical spreading rate 11.0 m2 per litre at 50 microns
- Touch dry after 2 hours
- Overcoating interval min. 16 hours, max. unlimited.
- Other colours available on request, please call for further details.
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.