£9.95 delivery on orders excluding certain products & postcodes *
A single component, water based acrylic finish for use in industrial environments.
A 1 part, solvent borne, intumescent coating, for 60 minutes for protection of structural steel against cellulosic fires.
A fast drying primer with good anti-corrosive properties and is suitable for steel and metal substrates.
Offers excellent penetration straight through the rust to the metal, driving out air and moisture (the causes of rust).
A white spirit based, single pack quick drying primer for the protection of metal against corrosion.
Lead Free low temperature anti-rust, corrosion resistant, top coat suitable for metal & plastic.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A water based white basecoat for the protection of internal structural steelwork in C1 and C2 environments. Fire resist up to 120 minutes.
A one pack acrylic thin film base coating for the protection for internal and semi exposed structural steelwork up to 60mins.
A tough, hard wearing finish coat for application over properly primed surfaces.
A general purpose, versatile paint offering economical protection and decoration for the maintenance of structural steel, cladding etc.
2 part, chemical / abrasion resistant, glass flake reinforced vinyl ester. For the internal lining of chemical storage tanks.
A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake.
Anti Corrosive red oxide paint for Gates, Railings Tanks and General Steel Work.
A solvent free coating designed for installation onto steel or concrete surfaces.
For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.
A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.
A high gloss coach enamel available in historic colours.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.
Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.
A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. A high quality, cosmetic finish.
A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.