Full Product Catalogue

A two component topcoat for the protection of structural steel in severely corrosive atmospheric environments.

A 2-part, polyurethane topcoat, with good gloss and colour retention. BBA Cert No. 08/H135-PS13. Highways Approved Item No.169.

A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.

Suitable for use as a finishing coat for protection of structural steel.

A two-component, solvent borne zinc ethyl silicate shop primer, designed for automatic spray application.

A two component pure epoxy paint which cures to an abrasion and corrosion resistant coating.

A two-component, glossy acrylic polyurethane coating for use onto structural steel in severely corrosive environments.

A two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

A pre-treatment etch solution for new galvanised steel. BBA Cert. no. 08/H135-PS10. Highways Approved Item No. 155

A two-component, zinc rich epoxy primer which offers cathodic protection of local mechanical damage.

A two component polyurethane paint with good gloss retention and colour stability.

A one part, solvent borne, intumescent coating, optimised for 60 minutes for protection of structural steel against cellulosic fires.

A very low VOC, single pack, waterborne acrylic thin film intumescent coating for passive fire protection of structural steel against cellulosic fires...

A one component, solvent-borne, fast drying intumescent coating for passive fire protection of structural steel.

Fast drying intumescent coating for structural steel.