Full Product Catalogue

A 2 part, low viscosity, multi-purpose epoxy resin primer for Sika flooring systems.

A one part, pre-blended, coloured synthetic dry shake hardener for concrete. For use on fresh, wet concrete.

A 2 part epoxy, high build, slightly textured, fast curing floor coating and seal coat. Ideal for workshops and garages.

A two part, very low yellowing, low viscous, transparent epoxy resin for mortars, screeds and seal coats.

A solvent-free, water dispersed floor primer based on epoxy resin.

A three part, epoxy modified cementitious, fine textured mortar for self smoothing floor screeds in thin layers of 1.5 to 3mm.

A one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion.

Polymer Modified Bentonite Waterproofing System. Self healing membrane for basement and below ground structures.

Easily moulded waterproofing paste for irregular detailing.

A single component mastic consisting of polymer modified natural sodium bentonite and further polymer additives.

Single sided adhesive tape, Butyl Rubber based.

Galvanised steel fixing strip of membrane termination.

A solvent based, clear acrylic resin polymer solution used to cure, harden and seal fresh or hardened concrete.

A multi-component, water based coloured polyurethane hybrid flooring screed.

A two part, solvent free, very low VOC emission, tough-elastic, coloured, self-smoothing PUR resin.

A thixotropic, 2-component repair mortar, based on a combination of epoxy resins with refined quartz fillers.

A cementitious epoxy resin compensated 3-component coating used as bonding primer and reinforcement corrosion protection.

A moisture tolerant, thixotropic, structural 2-component adhesive and repair mortar.

A cement based, fast setting, polymer modified one component repair mortar meeting the requirements of Class R4 of BS EN 1504-3.

A three part epoxy mortar, consisting of an epoxy binder and quartz sand with a maximum grain size of 1.2 mm.

A one component fast setting cementitious repair mortar, meeting the requirements of Class R4 of BS EN 1504-3.

A one component modified SBR polymer, blended with plasticisers and selected fillers.

A three part, epoxy modified cementitious, thixotropic, fine textured mortar for levelling and finishing of concrete, mortar or stone surfaces.

A thixotropic, 3-component patching and repair mortar.

A two part adhesion promoting primer based on polyurethane resin for several Sikalastic systems.

A two part, elastic, 100% solids, very fast curing and coloured pure polyurea liquid applied membrane with good chemical resistance.

A multi-component, water based coloured polyurethane hybrid flooring screed with self-smoothing properties.

A multi-component, water based coloured polyurethane hybrid screed with self smoothing properties.