Full Product Catalogue

Patio Decking Hard Surface Restorer for walls, floors, paths, roofs, decking, paving, boats and monuments.

A water based environmentally friendly clear sealer containing the highest quality polyurethane and acrylic Resins.

For the multi-surface removal of moss, mildew and algae and the prevention of regrowth. This concentrate will treat up to 40m2.

Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.

A fast curing, high strength, two component Methacrylate Resin mortar, formulated for rapid and permanent repairs to concrete surfaces.

A fast curing, high strength, trowel applied, three part Methacrylate Resin mortar.

A hard wearing, impervious floor finish. Full return to service in 2 hours. Hygienic, easy clean and chemical resistant.

A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.

A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.

A two pack, pourable, flexibilised methacrylate sealant suitable for direct pouring into horizontal floor joints.

A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.

Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.

Easy to use, fast cure for filling cracks and voids in concrete. Can be used at low temperatures.

Propane gas torches for use with thermoplastic line marking and thermoplastic signs.

Formulated for rapid and permanent repairs to concrete and masonry surfaces.

A two pack, fast curing flexible coating for line marking paint for concrete surfaces.

A two part gloss, epoxy floor coating. A tough, hard wearing finish for medium duty traffic floors. FeRFA Type 3 Approved.

A two pack, fast curing flexible coating for concrete surfaces offering excellent slip resistance.

A durable, low odour, low emission line marking paint with a rapid through cure and return to service.

A two pack, water dispersible epoxy based primer / sealer / clear coating.

A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.

A epoxy adhesive ideal for bonding a wide range of building materials to one another e.g. concrete, brick, metal, stone and wood.

A 2 part solvent free, liquid applied surface damp proof membrane and residual moisture suppressant.

A 2 pack water based epoxy floor paint for concrete and polymer modified cementitious screeds. Category FeRFA Type 1 & 2.

A 2 part epoxy primer for use on flooring prior to application of Centrecoat Armourcoat 3-350.

Provides a tough, hard wearing coating for light & medium duty traffic giving high performance at an economical cost.

A 2 pack rapid curing and versatile chemical resistant sealer / clear coating for concrete and Centrecoat epoxy screeds and mortars.

A heavy duty, trowel applied polyurethane floor screed for use on concrete and polymer modified cementitious screeds.