Full Product Catalogue

A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.

SigmaCover 690 LT (Aluprimer Winter Grade) for temperatures of 0°C up to +10°C.

Previously PPG SigmaCover 525. An anti-corrosive topcoat providing a water resistant, anti-fouling barrier, which is abrasion and impact resistant.

Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.

Formerly PPG SigmaLine 403. Designed to reduce the frictional resistance inside of steel pipes for the transportation of purified natural gas.

A two component moisture curing zinc ethyl silicate primer that offers anti-corrosive protection to structural steel and is suitable for use as a syst...

Waterborne intumescent coating for fire protection of structural steelwork.

Formally PPG SigmaDur 568. A 2 Part High Solids, High Build Polyurethane Gloss Finish.

Formerly Amercoat 450E, Amercoat 450S. A two pack PU Gloss Finish for steel. Item No.168. M24(XM92).

A self-priming coating for steel and concrete. Formerly PPG SigmaCover 640 / Amerlock 400C.

A 2 pack, fast drying, high solids, low temperatures epoxy coating for concrete and steel. LUL Cert 1329.

A two component high build polyamine adduct cured epoxy coating. Primarily designed for use in offshore splash zone maintenance.

An anti fouling release finish coat based on 100% pure silicone binder technology.

A two component, high build polyamide cured epoxy primer coating for application down to -5°C.

A two component, solvent free amine cured epoxy coating. Suitable as a tank coating for crude oil and aliphatic petroleum products.

Produced in 0.2 - 0.4mm grade to offer non-slip properties to many floor paints.

A two component, solvent free, amine cured, phenolic epoxy coating, designed for providing a one coating solution to tank exteriors.

A two component solvent free amine cured phenolic epoxy coating for pipe externals.

A 2 part, moisture curing, waterborne, low zinc silicate, prefabrication primer suitable for immediate application on shot blasted steel plates.

A two-component, tough and abrasion resistant aliphatic clear acrylic polyurethane gloss finish.

A two component, high build, amine adduct cured, phenolic epoxy holding primer.

Formerly Amercoat 160 HF. A one component zinc rich epoxy primer.

Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.

A tank lining designed to amplify cargo opportunities and reduce installation costs.

A two component, non-isocyanate epoxy acrylic gloss topcoat finish.

A two component, high solids polyamine adduct cured zinc rich epoxy primer. Meets Norsok M-501 Rev. 6, System 1.

A single pack, waterborne acrylic dispersion finish  for interior accommodations, machinery spaces and engine rooms.

A one component, waterborne acrylic zinc phosphate primer for use within a PPG system.