£9.95 delivery on orders excluding certain products & postcodes *
An anti fouling release finish coat based on 100% pure silicone binder technology.
A two component, high build polyamide cured epoxy primer coating for application down to -5°C.
A 2 pack, solvent free amine cured epoxy. A tank coating for crude oil and aliphatic petroleum products.
Produced in 0.2 - 0.4mm grade to offer non-slip properties to many floor paints.
A 2 pack, solvent free, amine cured, phenolic epoxy. For providing a one coating solution to tank exteriors.
A two-component, tough and abrasion resistant aliphatic clear acrylic polyurethane gloss finish.
A two component, high build, amine adduct cured, phenolic epoxy holding primer.
Low temperature curing protection of structural steel. Formerly SigmaZinc 170 and SigmaZinc 9.
Heat-resistant alkyd for aluminium finish on high-heat metal surfaces.
Formally Amercoat 891. Heat resistant silicone/acrylic finish - heat resistant up to 350°C.
A thinning substance specially manufactured for use with various different paints, available from Promain UK Ltd.
A thinning substance specially formulated for use with various different PPG paints and coatings.
A clear, high performance, thinning liquid, specially made for use with various different PPG paints.
A clear, thinning product specially designed for use with various different PPG paints.
Thinner 91-92 is a clear, thinning product specially designed for use with various different PPG Sigma paints.
Thinner 21-25 (Amercoat 101) is for use with PPG Hi-Temp 1027.
Formerly Sigmarite 88. Water based cleaner or removing dirt, oil, etc. from floors, metal, cladding etc.
A 2 pack silicone based tie-coat for fouling release systems that can be used on any new build or maintenance project.
Formerly SigmaCover 640AL / Amerlock 400AL. A 2 pack high performance self priming, high solids epoxy coating.
A universal coating which provides protection against damage from natural exposure within most environments.
A two component micaceous iron oxide pigmented polyamide cured epoxy primer/sealer/coating.
SigmaCover 690 LT (Aluprimer Winter Grade) for temperatures of 0°C up to +10°C.
Formerly PPG SigmaCover 525. An anti-corrosive topcoat providing a water resistant, anti-fouling barrier.
Formally Amercoat 878 a one component heat resistant moisture curing silicone aluminium.