£9.95 delivery on orders excluding certain products & postcodes *
A very high solids, low VOC, two component high build epoxy containing a high level of chemically resistant glass flake.
A light coloured, tar free, surface tolerant, universal primer with high volume solids (82%). Intergard 5000 is also tolerant of damp surfaces.
A light reflective single pack oleoresinous aluminium coating that is ideal for pipework, cargo holds, etc.
A fast drying, single pack modified acrylic cosmetic finish for above the waterline in marine environments.
A single pack acid etch primer free from zinc chromate that is ideal for use as a pretreatment primer above water.
A two component, solvent free, chemically resistant, heavy duty epoxy phenolic tank lining.
A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.
A two component, fast drying modified epoxy phosphate prefabrication primer for manual or automatic spray application.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A single component, water based paint disbonder designed to remove coating residues from metallic substrates.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.
A patented technology, high performance, low VOC single pack acrylic polysiloxane finish coat containing no free isocyanates.
Designed for use within certain International Paints to provide a safe anti slip finish to walkways.
A high performance, two component, high solids epoxy barrier coating suitable for low temperature curing.
A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C.
A two pack, heat resistant, zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C).
A light coloured, solvent free, pure epoxy coating for potable water tanks.
A one pack, alkyd based, high visibility coating for marking on ships. Available in fluorescent orange.
A two pack epoxy primer / undercoat / tie coat for internal ship spaces.
A two pack epoxy filler for pitted steel or as an anode shield in marine environments.
Suitable for internal lining of storage vessels and process vessels at elevated temperatures up to 130°C.
A single component, fast drying, high build alkyd shop primer that is suitable for mild to moderate corrosive environments.
A highly cross-linked, two component, high build epoxy phenolic coating.
A single component, finish suitable for areas subject to intermediate service temperature that require a coloured finish.
A two component, metallic zinc rich epoxy primer, designed to provide excellent corrosion resistance.
A two component, solvent free epoxy which can be applied underwater and will cure underwater.