£9.95 delivery on orders excluding certain products & postcodes *
A solvent free coating designed for installation onto steel or concrete surfaces.
For use on tanks or other steel structures, trenches, pits, secondary containment & floors, where chemical resistance is the primary concern.
A flake filled vinyl ester coating offering outstanding chemical resistance and a quick return to service.
A VOC compliant, single component, water based anti-corrosive primer/finish.
A single component, water based acrylic finish for use in industrial environments.
Formulated to provide up to 60 minutes fire protection on internal 'I' sections beams, columns and hollow sections.
Provides up to 2 hours fire protection on 'I' sections beams (including cellular beams), columns and hollow sections.
A versatile, 2 pack modified epoxy intumescent coating for cellulosic fire protection. Provides a high quality, cosmetic finish.
A high performance, high build, solvent free, two pack modified epoxy intumescent fireproofing coating.
A water-based rust remover which is 100% biological degradable and free from toxins.
Intumescent coating for 60 minutes fire resistance to structural steelwork.
A low VOC, high solids, rapid cure primer/finish, offering excellent anti-corrosive protection and long term colour and gloss durability.
A two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.
A two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability as a finish coat.
A tough, hard wearing finish coat for application over properly primed surfaces.
For use on a wide variety of substrates including hand prepared rusty steel.
A two component epoxy zinc phosphate / micaceous iron oxide primer suitable for low temperature overcoating.
A low VOC, high performance, two component, isocyanate free cross-linking acrylic finish.
A two component epoxy anti-corrosive primer pigmented with zinc phosphate for anti corrosive protection.
A two part, abrasion resistant pure epoxy coating pigmented with aluminium to give excellent long term anti-corrosive protection offshore or below wat...
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer.
A high performance, low VOC, water borne two component epoxy with a high gloss finish for use on structural steel and concrete floors.
Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
A two part, chemical and abrasion resistant, glass flake reinforced vinyl ester for the internal lining of chemical storage tanks and vessels.
Provides up to 60 minutes cellulosic fire protection over a wide range of I section beams and columns and hollow sections in interior environments.
A two component, low VOC, high solids, fast drying polyaspartic semi-gloss primer/finish coating.